Daily maintenance of UD weft less machine

Daily maintenance of UD weft less machine
1、 Daily insurance
1. Turn off the power 30 minutes before work to clean and clean the guide roller and guide roller of the compound machine to ensure that the guide roller and pressing roller are bright and flexible.
2. Before long-term parking or parking, the rubber roller and rubber roller shall be separated in time, and the rubber roller, rubber coating roller, rubber water tank, hose, glue and dirt shall be cleaned.
3. The ground around the compound machine shall be kept clean and free of dust.
4. Regularly check the rotation of guide roller and pressure roller of compound machine to ensure normal operation.
2、 Weekly report
1. Check the operation of each component of the compound machine before leaving work every Saturday, and find abnormalities in time.
2. Check and clean the torque motor of the coiler every Saturday.

3、 Monthly insurance
1. One day is reserved every month to complete the weekly and monthly insurance content.
2. Remove all protective covers of the machine, clean and transport all drive sprockets, chains and gears without any dirt and grease. Carefully check whether all transmission bearings are normal. If any abnormality is found, repair it.
3. Clean and maintain the electric hoist, and conduct various safety inspections to ensure safety and normal operation.
4. Clean and check the cooling fan, no dust is required, and the blades can operate normally.
5. Clean and maintain the air compressor, drain and replace the oil, check whether the air supply is normal, and repair if any abnormality is found.